Moving Forward: Blog

Proper O-Ring Installation will keep you running!

By: TDS Author | Oct 28, 2014 11:35:11 AM

SAE O-Ring Boss Fitting Installation:

Mud Hog Start-Up Procedure Vital to Running Properly

By: TDS Author | Oct 15, 2014 4:34:33 PM

At Mud Hog, we want to ensure that once you have your axle, that you don't run into any unnecessary problems.  So, here is the start-up procedure to help you get up and running for your best harvest! Start-Up Procedure After having completed the installation or servicing of the rear wheel drive system on a hydrostatic drive machine, the following start-up procedure must be performed to insure adequate bleeding and flushing of the newly installed or serviced hydraulic components. This procedure also serves to check proper plumbing of the hydraulic circuit.